Tuthill FILL-RITE 900CDP Serie Manual De Instalación, Operación Y Seguridad Del Propietario página 15

Medidor digital de líquido
Idiomas disponibles

Idiomas disponibles

Dimensions
Specific Conditions of Use
The following information is provided in compliance with UL standards to define specific
safety parameters under which this appliance must be operated.
WARNING! Batteries may ONLY be replaced with the following:
Incorrect battery selection presents a safety hazard.
WARNING! CONDITIONS FOR SAFE USE: The Remote Reed Switch Assembly
Part No. SA000048-005 is provided with a non-metallic housing. Care must be
taken to avoid ignition hazards due to potential electrostatic charging hazard.
The Series 900CDP meters may be used in an ambient temperature range of -40ºC to
+80ºC when backup battery cells are not installed, and in an ambient temperature range
of -40ºC to +60ºC when backup battery cells are installed.
The housing of the Series 900 CDP meter is made of powder coated aluminum.
Care must be taken in installation to make sure the powder coated aluminum meter
case does not wear away to expose bare metal, or that it is not installed where friction
sparking may occur.
Warranty Information
Your quality Tuthill / Fill-Rite product carries a full manufacturers limited warranty.
For terms and conditions of that warranty please visit www.fillrite.com. Tuthill Corporation
recommends you retain your sales receipt as proof of purchase.
Duracell MN1500
Duracell MX1500
15
Energizer E91
loading