Idiomas disponibles
Idiomas disponibles
19.
DISPLAYED MESSAGES
DISPLAYED MESSAGE
FILL TANK WITH FRESH
WATER
INSERT WATER TANK
EMPTY GROUNDS CONTAINER The grounds container (A10) is full.
INSERT GROUNDS CONTAINER After cleaning, the grounds container (A10) has
ADD GROUND COFFEE MAX.
ONE MEASURE
ESC
POSSIBLE CAUSE
Insufficient water in the tank (A16).
The tank (A16) is not correctly in place.
not been replaced.
The "pre-ground coffee" function has been se-
lected without placing any pre-ground coffee
in the funnel (A4).
REMEDY
Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
Insert the tank correctly and press as far as it
will go.
Empty the grounds container and drip tray
(A14), clean and replace. Important: when
removing the drip tray, the grounds contain-
er must be emptied, even if it contains few
grounds. If this is not done, when you make the
next coffees, the grounds container may fill up
more than expected and clog the machine.
Remove the drip tray (A14) and insert the
grounds container.
Place pre-ground coffee in the funnel (fig. 13)
and repeat delivery
25
→
