Idiomas disponibles
Idiomas disponibles
USB mode in configuration mode
USB mode
The
tion and evaluation of the data on the USB thumb drive.
To start a data download, confirm this again with the "Pause/Start" button. If this
repeated confirmation with the "Pause/Start" button is not carried out, the
download starts automatically after one minute.
While a charging process is in progress, the USB thumb drive may be connected
after pressing the "Pause/Start" button. It is only possible to read data and not to
perform an update or load a configuration.
Safely remove
-
Update
-
-
-
-
-
Download
-
-
-
44
I-SPoT-VIEWER
software (www.fronius.com/i-spot) supports the visualiza-
Safely remove the USB thumb drive once the desired action is complete.
A list of suitable update files stored on the USB thumb drive opens.
The desired file is selected and confirmed in the same way as scrolling
through the settings.
Do not rename the automatically assigned file name of the update file!
The latest firmware is available in the
Firmware installation instructions are included in the zip file of the down-
load.
The data of the logged charging parameters stored in the datalogger of the
device are saved for the I-SPoT VIEWER on the USB thumb drive.
Events as well as device settings and user curves (configuration) are also
saved.
The following time ranges can be selected for the data logger:
1 month
3 months
All
Since last time
In USB mode, the display shows
whether a USB thumb drive is plugged
in.
The USB thumb drive must meet the
following specifications:
-
Formatting: FAT32
-
32 Gigabyte maximum
-
No multiple partitioning
download area
of the Fronius website.
