Idiomas disponibles
Idiomas disponibles
10-Installation
10.6 Door Reversibility
Before connecting the appliance to the power supply, you should check whether
the door swing must be changed from right (as delivered) to left, if this is required
by the installation location and the usability.
Warning!
•
The appliance is heavy. You need two persons to carry out the door
reversibility.
•
Before any operation, first unplug the appliance from the mains
•
Do not tilt the appliance more than 45°C to prevent damage of the cooling
system.
Assembly steps (Fig. 10.6):
1. Provide necessary tool.
2. Unplug the appliance.
3. Remove the upper hinge cover (1) and unscrew the upper hinge (three
screws) on right side (2).
4. Unplug the connection cable
5. Lift the loose refrigerator door carefully off the lower hinge.
6. Remove the lower hinge of the upper door.
34
GB
