Idiomas disponibles
Idiomas disponibles
2. TUBE
2.1. TUBE MAINTENANCE
The tube on your boat is made from
NEOPRENE CSM-CR 1670 decitex, 1300 gr/m² or 1500. gr/m² cloth, or
PVC Strongan cloth
Maintenance tips are provided in the Owner's Manual Volume I.
2.2. MOUNTING THE TUBE ON THE HULL
IF THE TUBE HAS BEEN STORED AT A TEMPERATURE OF LESS THAN 0°C,
LEAVE IT FOR 12 HOURS IN A TEMPERATE LOCATION (AT 20°C) BEFORE
UNFOLDING IT.
YOU CAN INFLATE THE TUBE PRIOR TO MOUNTING IT (TO A PRESSURE OF
240mb) AND LEAVE IT TO STABILISE FOR APPROXIMATELY ONE HOUR. THEN
DEFLATE IT.
NOTE: The tube is mounted on the hull when deflated.
1
To make it easier to mount the tube, place some liquid soap in the hull rails (A).
2
Position the tube headline (a) in the hull rail (b) starting from the bow. Pull the tube until the water
barrier reaches the transom.
3
Proceed in the same way for the other side of the tube.
TUBE – Mounting the tube on the hull
Page 15 / 50
E
N
G
L
I
S
H
Edition 1
