wolfcraft 5027000 Instrucciones De Empleo página 21

Power tool use and care
• Do not force the power tool. Use the correct power tool for your task. You will be able to do the work better and
more safely when using the correct power tool, in compliance with its rating.
• Do not use a power tool with a defective switch. A power tool that cannot be switched on or off is dangerous and
has to be repaired.
• Disconnect the plug from the electric socket and/or remove the battery, if detachable, from the power tool be-
fore adjusting the tool, changing accessories or storing the power tool. This precautionary measure prevents the
power tool from being started accidentally.
• When not in use, store power tools out of reach of children. Do not allow persons who are unfamiliar with the
power tool or these instructions to use the power tool. Power tools are dangerous if used by inexperienced persons.
• Maintain power tools and accessories with great care. Check that moving parts are working properly and no
binding occurs; check for parts that are broken or damaged such that the function of the power tool is affected.
Have damaged parts repaired before using the power tool. Many accidents are the result of poorly maintained
power tools.
• Keep cutting tools sharp and clean. Diligently maintained cutting tools with sharp cutting edges are less likely to bind
and easier to control.
• Use power tools, accessories, attachments etc. in accordance with these instructions. Take the work conditions
and the task to be performed into account. Using power tools for applications other than the intended use can result
in hazardous situations.
• Keep handles and grasping surfaces dry, clean and free of oil and grease. When handles and grasping surfaces are
slippery, it is not possible to ensure safe operation and control of the power tool in unexpected situations.
Service
• Have your power tool repaired only by qualified specialists, using only original replacement parts. This ensures
the power tool remains safe to use.
Product-specific safety information
• Adhere to the safety regulations of the manufacturers of your drive machines under all circumstances.
• These devices must comply with the VDE regulations. Devices manufactured after 1995 must bear a CE mark.
• Check that the appliances used are correctly mounted before commencing work (e.g. bolted joints).
• Clamp the part to be processed securely.
• Make sure that your clothes are tight fitting, work without gloves and protect your hair.
• Never reach into machines which are in operation.
• Do not make any modifications or alterations to the product.
• Make sure that the power drill is correctly clamped in the drill stand before putting it into operation.
• Make sure that you do not come into contact with rotating parts.
EN
21