Idiomas disponibles
Idiomas disponibles
Maintenance and care of open (wet-cell) batter-
ies
Notice:
Caring for maintenance-free batteries only entails
following proper charging procedures and config-
uring the charging curve correctly.
Open battery compartment for maintenance
• The machine must be switched off and the key must be re-
moved.
Warning:
Before opening the battery compartment make sure
that both tank areas are empty.
• Lower the suction nozzle.
• At the bottom left and right on the
front side of the machine you will find
the battery compartment release.
• Unscrew both screws and remove
them.
• Stand on the left side of the machine.
• Hold the recessed grip (1) with one
1
hand and the driving handle (2) with
the other and carefully open the bat-
2
tery compartment until the driving
handle lies on the ground.
Warning:
After maintenance, carefully bring the tank back to
its initial position and reattach the screws.
Notice:
Lift the suction nozzle again
Notice:
Put the key back in place.
Prior to commissioning
Check emergency stop
Caution:
The key switch functions as an EMERGENCY OFF
and is an important safety element.
- Therefore, the function of the button must be checked
regularly in short time intervals, before using the ma-
chine.
• Switch on the machine by pushing the key switch in.
• Take the driving handle and position the hands in such a
way that you can work easily with them.
• By gently pushing the driving switch into the direction of
movement the machine is set into motion.
• Remove the key switch while driving.
Caution:
All functions of the machine are thereby deactivat-
ed.
The machine is not actively braked but rolls out to a
standstill.
- Always keep your hands on the driving handle until
the machine comes to a complete standstill.
110
Danger:
If one of these functions is not working, the ma-
chine must be decommissioned until it can be pro-
fessionally repaired by an authorized TASKI
service partner.
Operator and Power User
Notice:
Two keys are always supplied with the machine.
Power User key (gray)
• The Power User can make advanced basic settings via the
Power User menu.
Operator key (orange)
• The Operator can make the necessary settings for operat-
ing the machine.
Power User Menu
Notice:
The Power User menu can only be activated by us-
ing the Power User key (gray).
Control panel:
Notice:
To activate the Power User menu on the control
panel, all functions must be switched off.
If a function such as Vacuum cleaner, Eco mode, Tool,
etc. is active, the Power User menu is not accessible.
• Switch the machine on.
• Pressing the ECO mode button and
the Cleaning solution supply button
simultaneously activates the Power
+
User menu in the display.
Touchscreen:
• Switch the machine on.
• Select the settings (gear symbol) in
the bottom right corner of the display.
Relocation drive
• Switch on the machine (key switch).
• Take the driving handle and position the hands in such a
way that you can work easily with them.
• By gently pushing the driving switch
into the direction of movement, the
machine is set into motion. If you let
go of the driving switch, the machine
will stop.
