Idiomas disponibles
Idiomas disponibles
Determining Dimensions
The MP Series and MT Series are a modular system of cabinets that lets you install cabinets in many different combina-
tions. The overall size of the cabinets is determined by the overall dimensions of the assembled cabinet units. Before cut-
ting any holes in the wall, determine the overall
that shows the overall dimensions and the rough opening dimensions.
Determining Width:
1. Determine the front width of the cabinet model(s):
CABINET WIDTHS:
MP16 and MT16 = 15 1/4" (387.35 mm) wide
MP20 and MT20 = 19 1/4" (488.95 mm) wide
MP24 and MT24 = 23 1/4" (590.55 mm) wide
2. If you are combining cabinets, add widths for each cabinet
to determine overall width.
3. Subtract ¾" (19.05 mm) from the total width to determine the
horizontal length of the rough opening.
Determining Height:
1. Determine the front height of the cabinet model(s):
CABINET HEIGHTS:
MT Flat Top = 30" (762 mm) high
MT Arch Top = 34" (863.6 mm) high (rough opening same as Flat Top)
MP Flat Top = 39 3/8" (1000.125 mm) high
MP Arch Top = 43 3/8" (1101.725 mm) high (rough opening same as Flat Top)
2. Subtract ¾" (19.05 mm) from the height to determine the vertical
height of the rough opening.
Cabinet Location
When selecting the cabinet location, note the following:
■
There must be at
least a 1" (25.4 mm) clearance between the
top of the faucet spout and the bottom of the cabinet door and
at least 1" clearance from the top of the cabinet door to the
ceiling (see Figure B).
■
Power for the "E" option should be provided separately from
the optional cabinet lights so that when lights are turned off, "E"
option cabinet remains on.
■
If recess mounting cabinets, determine
recess depth of rough opening. The recess
depth varies according to the cabinet model:
D4 model = 3 ¾" (95.25 mm) deep
D6 model = 5 ¾" (146.05 mm) deep
D8 model = 7 ¾" (196.85 mm) deep
■
Be sure that there is enough
the door above the rough opening
(see Figure B).
SS476 MP and MT Cabinets 01/27/06
dimensions. See Figure A for an example (using an MT16D4FBN cabinet)
clearance for
1" (25.4 mm) CLEARANCE
RECESSED
INSTALLATION
1" (25.4 mm) CLEARANCE
2
Figure A
MT16D4FBN
30 "
30 "
(762 mm)
(762 mm)
15 1/4"
(387.35 mm)
ROUGH OPENING DIMENSIONS
Height: 29 1/4" (30" - 3/4")
742.95 mm (762 mm - 19.05 mm)
Width: 14 1/2" (15 1/4"- 3/4")
368.3 mm (387.35 mm - 19.05 mm)
Figure B
SURFACE
INSTALLATION
