Idiomas disponibles
Idiomas disponibles
ASSEMBLY OF THE UNIT
Place the unit on a flat, stable surface so that all four rubber feet touch the surface
of the ground.
Plug the power cord into the socket (7) on the unit. Insert the plug into the
electrical outlet. Caution! The electrical outlet must be grounded. This will reduce
the risk of electric shock.
Installing/uninstalling the rotor
Installing/removing the rotor
To mount the rotor on the machine, put the rotor hole "A" (marked on the picture
below) on the bracket "B". Hold the rotor with both hands and press evenly and
symmetrically until clamp "B" goes through hole "A" and locks in place (click sound
will be heard). Verify that the rotor has been installed correctly - when pulled upwards
it should not jump off the bracket "B".
Caution!: The front of the rotor has embossed numbers. Mounting the rotor in an
upside down position can damage the unit and pose a threat to the unit's user.
To remove the rotor, use the thumbs of both hands to squeeze the "B" bracket and
then pull the rotor upwards.
