Idiomas disponibles
Idiomas disponibles
How to Brew a Pod
w WARNING
Burn Hazard.
If overflow occurs, unplug and allow coffee maker to cool.
To avoid hot coffee overflowing:
• Fully insert cup or travel mug on cup rest.
• Do not lift lid during the brewing process.
• Use appropriate sized cup or travel mug for your brew size.
• If brew cycle is stopped early, the coffee must be drained. Return
cup or travel mug to cup rest. Press desired cup size button. Failure
to drain the cup or travel mug can cause the next cup brewed to
overflow. Discard coffee.
w CAUTION
Cut Hazard.
Removable pod holder has a sharp needle. Piercing needle on
underside of lid is also sharp. Use caution when handling.
NOTES:
• If Lid is opened or any button was pressed to end brew cycle early,
discard contents of cup or travel mug and pod. Press desired cup
size button to restart brewing cycle.
• Use only cold water in Reservoir. Do not use hot water.
• Do not reheat coffee in machine.
• Do not use creamer or nondairy creamer in Reservoir.
• After brewing pods, such as hot cocoa, sugar-based or keto,
immediately brew a water-only cycle without a pod to avoid
possibility of clogging Piercing Needle.
• Press any cup size button to stop brew cycle.
• All cup size buttons flashing 3 times: Coffee Maker Lid is not closed
properly. Push Lid down to lock into place. Press desired cup size
button.
• Do not brew coffee before ensuring Removable Needle Holder
arrow icon ( ) is aligned with lock icon ( ) inside FlexBrew Lid.
1. Lift up Water Reservoir and remove Lid. Add water to at least MIN
fill line (16 oz. [473 mL]) or MAX fill line (50 oz. [1.48 L]). Replace
Lid and place Water Reservoir on to Coffee Maker.
2. Plug into outlet.
3. Lift Lid Latch until Lid stays in place.
4. Place Gray Removable Pod Holder in Funnel.
5. Place a pod into Pod Holder. Do not remove foil.
6. Close Lid and snap in place to pierce pod.
7. Use Cup Rest for a cup/mug, or remove Cup Rest for a travel
mug.
8. For a stronger cup of coffee, press Bold ( ) Button. Light will
illuminate if pressed.
9. Press desired cup size button:
296 mL). Desired cup size button will illuminate when coffee is
brewing.
10. Coffee Maker will shut off automatically when brewing is complete.
11. Unplug.
12. Pod Holder should be rinsed after every use.
NOTE: If Refill Water Light and selected cup size light are flashing,
refill Water Reservoir, then press flashing cup size button to finish
brewing.
(8 oz./237 mL) or
(10 oz./
5
