Technoline WT 500 Manual página 16

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
1.
Press SLEEP once, the LCD display shows
Press SLEEP once at a time to select in steps a 120 to 5 minutes sleep timer duration.
2.
The sleep timer display remains for few seconds and then returns to normal time display. The
icon will appear, showing the timer is activated.
3.
The radio will play for the programmed sleep time and then shut off. To check how many sleep
time is remaining, press SLEEP once.
4.
To turn off the radio before the sleep time has elapsed, press and hold MODE for 2 seconds.
Note: The SLEEP function could also control your white LED light, colored mood light, nature sounds
or the AUX function in the same way.
TROUBLE SHOOTING
If your unit displays irrelevant time or does not function properly, which maybe caused by electro-static
discharge or other interference, use a thin object to press the RESET button at the back of your unit.
All the settings will be reset to default settings and you need to set your unit again.
CARE OF YOUR PRODUCT
1.
Place your clock radio on a stable surface, away from sources of direct sunlight or excessive
heat or moisture.
2.
Protect your furniture when placing your units on a natural wood and lacquered finish by using a
cloth or protective material between it and the furniture .
3.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such
as Benzine, thinner or similar materials can damage the surface of the unit. Make sure the unit is
unplugged before cleaning.
4.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadimium) batteries.
5.
If the unit is not to be used for a prolonged period, such as a month or longer, remove the
batteries to prevent possible corrosion. Should the battery compartment become corroded or
dirty, clean the compartment thoroughly and replace the batteries.
6.
Do not open the inner back case or tamper with any components of this unit.
7.
Do not plug in any other AC/DC adaptor with incorrect specifications or voltage.
icon and 120 (120 minutes) and flashes.
P.7
loading