AUTOMATIC SNOOZE ALARM
If
is not touched during the alarm is sounding, the alarm will sound for 3 minutes and then
turns off automatically. The alarm will stop temporarily and sound again after the set snooze duration
(5-60 minutes). This automatic snooze function will last for 1 hour.
To stop the alarm sound, press ALM 1.2 and automatically reset it to sound again on the following day.
TO USE THE WHITE LED LIGHT OR THE COLOR CHANGING MOOD LIGHT
1.
Simply tap on
default brightness of the white LED light. You could press ▲ or ▼ to increase or reduce the
brightness level from 0 (lowest) to 15 (highest).
2.
Touch
3.
Touch
4.
Touch
Note: The LCD display will return to time display in 8 seconds if there is no further press of any button.
TO USE THE HI-LO DIMMER
Simply press
once to select Hi-Lo brightness of the LCD display (3 levels).
TO USE THE MODE FUNCTION
Simply press MODE to change the mode as below:
Clock mode → Radio mode → Nature sounds mode (
TO LISTEN TO THE RADIO
1.
Press MODE once to turn on the radio, the clock display will show the radio frequency in
Then press ▲ or ▼ to tune into a desired radio station. To scan the stations, touch and hold ▲ or
2.
▼ for a few seconds and release. The radio will search and stop on the next good receivable
station.
3.
To stop the radio function, press MODE for 2 seconds.
once, the LCD displays L07 (volume level 07), then press ▲ or ▼ to adjust to your
4.
Press
desired volume level from level 1 to 15.
Note: For best reception of radio signal, keep your radio away from fluorescent lamps or mobile phone,
which may cause interference to the radio.
TO LISTEN TO NATURE SOUNDS
Press MODE twice, the LCD shows
:
Birds
:
Forest
:
Beach / water front
:
Rain and storm
to turn on the white LED light. The LCD display shows 10, which is the
again to turn on the color changing mood light. The LCD shows
again to fix a color of your mood light. The LCD shows
again to turn off all the light functions.
,
) → Return to clock mode
-
,
or
for our selected nature sound:
P.5
.
.