Idiomas disponibles
Idiomas disponibles
In addition to input S, further buttons from the Bluetooth
mesh network can be assigned to the sensor.
A function for a short and a long press of the button can
be defined for each button. The following functions can be
selected by means of a short button press:
– A button with the "On/Off" function can switch the
lighting on and off manually.
– Manual switching off is not possible with the "On" func-
tion. The stay-ON time is restarted each time a button
is pressed.
– With the "Off" function, the lighting can only be
switched off manually.
– There are also the "On x min" and "Off x min" functions,
with which the lighting can be switched on or off for
a defined period of time.
The following functions can be selected by means of
a long button press:
– A button with the "Dim up/Dim down" function can dim
the lighting up and down manually.
– The "Dim up" function can only be used to dim the
lighting up.
– The "Dim down" function can only be used to dim the
lighting down.
A button is required to operate the sensor in semi-auto-
matic mode.
In addition, calling up a preset scene can be assigned as
a function to the button.
Presentation mode
If the light is switched off via a button, the sensor activates
the presentation mode.
– The load remains switched off as long as motion is
detected.
– As soon as no more motion is detected and the
stay-ON time has elapsed, the sensor switches back
to normal sensor operation.
– 76 –
Index
