Idiomas disponibles
Idiomas disponibles
Daytime operation
Daytime operation is started by setting the twilight
setting to the maximum. In daytime operation, the sensor
switches the lighting on regardless of the ambient bright-
ness if motion is detected.
Teach
With the help of the teach function, the twilight setting or
the setpoint for constant light control can be set automat-
ically based on the measured light conditions. When con-
stant light control is deactivated, the twilight setting is set
to the currently measured value for the ambient brightness.
The light is automatically switched off during the process.
If constant light control is active and the light is switched
on, the setpoint for the control is set to the measured light
value instead. The light should be dimmed manually in
advance so that the target value is reached as precisely as
possible. There is also the option of carrying out the teach
procedure at a specified time.
Constant light control
If this function is activated, the lighting is regulated to
a constant brightness setpoint. The brightness setpoint
corresponds either to the response threshold set for the
automatic brightness control or to the light value set via
the teach function.
– 73 –
Index
