STEINEL IR Micro Office DALI-2 Manual De Instrucciones página 72

Bluetooth grouping
It is possible to operate the device as a single sensor or to
connect several sensors to form groups.
All sensors assigned to a group act according to the group
parameters set in the Steinel Connect app. A sensor for
the brightness measurement must be selected in each
group. All group participants accept the brightness value
transmitted by this sensor.
Neighbour function
The neighbouring groups are assigned to the active sensor
group using the neighbour function. The group reacts to
switch-on signals from the assigned neighbouring group
and switches according to the settings.
Fully automatic
The lighting switches ON and OFF automatically depend-
ing on brightness and presence.
The lighting can be switched on manually at any time.
The automatic switching mechanism is temporarily inter-
rupted.
Semi-automatic
The lighting only switches off automatically.
Switch-on takes place manually, light must be requested
with a button and remains switched on for the set stay-ON
time.
Twilight setting
The response threshold (twilight) can be infinitely varied
from approx. 2 to 1,000 lux.
– = daylight mode (depending on ambient light level)
– = night-time operation (approx. 2 lux)
– 72 –
Index