Idiomas disponibles
Idiomas disponibles
1
Introduction
1 Open the battery cover. Loosen the screw with a suitable Phillips screwdriver
2 Insert the batteries. Observe the proper battery polarity. The terminal ends of
3 Close the battery cover. Place the battery cover back in its original position
Figure 1-1
The battery level indicator in the lower left-hand corner of the display indicates
the relative condition of the batteries.
levels the indicator represents.
20
and remove the battery cover as shown in
each battery are indicated inside the battery compartment.
and tighten the screw.
Installing the batteries
Figure
1-1.
Table 1-1
describes the various battery
Keysight U1190A Series User's Guide
