Idiomas disponibles
Idiomas disponibles
3
Clamp Meter Features
Detecting AC Voltage Presence (Vsense)
– You are advised to test on a known live circuit within the rated AC voltage
WARNING
– Voltage could still be present even if there is no Vsense alert indication.
– The Vsense detector may be affected by differences in socket design,
You are advised to measure voltage by using test leads through the AC V or
CAUTION
DC V function after using the Vsense function, even if there is no alert
indication.
This measurement function is applicable for U1192A, U1193A, and U1194A
models only.
The Vsense detector is a non-contact voltage detector that detects the presence
of AC voltages nearby.
Set up your clamp meter to enable the Vsense function as shown in
If the presence of AC voltage is sensed, the clamp meter's beeper will sound.
NOTE
The audible alert allows you to easily sense nearby AC voltage presence.
No resolution and accuracy of voltage measurement will be d isplayed in this
mode.
68
range of this product before and after each use to ensure that the Vsense
detector works.
Do not rely on the Vsense detector with shielded wire. Never touch live
voltage or conductor without the necessary insulation protection or
power off the voltage source.
insulation thickness, and insulation type.
Keysight U1190A Series User's Guide
Figure
3-3.
