Sym pt om
No picture
If the Pow er LED indicator is not
lit, or if the Pow er LED indicator
w ill not light up w hen the Pow er
button is pressed
The Pow er LED indicator
turns on red
If the Pow er LED indicator
is green, or flashing amber
If " Cable Disconnected" appears
on the screen
If " No Input Signal" appears on
the screen, or the Pow er LED
indicator is either amber or
alternating betw een green and
amber
Problem caused by a
connected computer or other
equipment, and not caused
by the display
Downloaded from:
https://www.usersmanualguide.com/
Check t hese it em s
Check that the pow er cord and AC adapter are properly connected.
Press the display pow er button once.
The display is in remote off mode. Try pressing the pow er button of the display tw ice or remote card once.
Use the self-diagnosis function (page 39).
Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets (pages 6, 10, and 12).
Check that the video input connector's pins are not bent or pushed in.
Check that the input select setting is correct (pages 5, 6, and 12).
A non-supplied video signal cable is connected. If you connect a non-supplied video signal cable, " Cable Disconnected" may appear on the
screen before entering the pow er save mode. This is not a malfunction.
Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets (pages 6, 10, and 12).
Check that the video input connector's pins are not bent or pushed in.
Check that the input select setting is correct (pages 5, 6, and 12).
The computer is in pow er saving mode. Try pressing any key on the keyboard or moving the mouse.
Check that your graphics board is attached to the computer properly.
Check that the computer or other equipment are pow ered " on."
- 35 -