Husqvarna 525iECS Manual De Usuario página 10

1. Make sure that the power trigger is locked when the
lock is in its original position.
2. Push the power trigger lockout forward (A) and
down. Hold the power trigger lockout against the
handle (B) and make sure that it returns to its
original position when you release it.
3. Make sure that the power trigger and the power
trigger lockout moves freely and that the return
springs operate properly.
4. Start the product, refer to
page 14 .
5. Push the power trigger fully to apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops and remains still.
To do a check of the cutting attachment guard
WARNING:
attachment without an approved and
correctly attached cutting attachment guard.
Always use the recommended cutting
attachment guard for the cutting attachment
that you use, see
If an incorrect or faulty cutting attachment
guard is attached, it can cause serious
personal injury.
10
B
A
To start the product on
Do not use a cutting
Accessories on page 20 .
WARNING:
guard is installed. Refer to
guard on page 13 .
The cutting attachment guard stops objects that eject
in the direction of the operator. The cutting attachment
guard also prevents injuries that can occur if you touch
the cutting attachment.
1. Deactivate the product.
2. Do a visual check for damages, for example cracks,
on the cutting attachment guard and front guard.
3. Replace the cutting attachment guard if it is
damaged.
To check the blade
The blade is designed and manufactured to withstand
the loads that edging of a lawn involves.
• Check the blade for damage or cracks. A damaged
blade should always be replaced.
To check the support flange
• Check that the support flange is not cracked due to
fatigue or due to being tightened too much. Discard
the support flange if it is cracked.
To check the locknut
CAUTION:
locknut must not be so worn that you can
turn it by hand. The lining should offer a
Make sure that the front
To install the front
The nylon lining inside the
1847 - 001 - 28.11.2022