PYD Electrobombas MP Serie Manual De Instalación Y Mantenimiento página 11

INSTRUCTIONS MANUAL AND MAINTENANCE
SERIE MP
7. TRANSPORTATION
The machines in question shall be supplied in suitable packaging to ensure adequate protection
during all stages of transport. If on receipt of the goods the packaging is damaged, it is neces-
sary to ensure that the machine has not been damaged during transport and that it has not been
tampered with. In the event of damage to the equipment or if any part of the machine is found to
be missing, the transporter and the manufacturer must be notified immediately and the corres-
ponding photographic documentation must be provided. Materials used to protect the equipment
during transport must be disposed of using the disposal channels existing in the country of
destination.
8. LIFTING AND MOVING
For all lifting and moving operations, the operator must use the minimum personal protective equi-
pment required for the operations to be carried out (safety shoes, gloves and protective helmet).
Machines with a dead weight of more than 25 kg must be moved using suitable moving systems
with a capacity greater than the weight of the machine to be handled. (See the weight indicated
on the packaging). If it is necessary to use belts for handling the machine, these must be in good
condition and must be of adequate strength for the weight of the machine to be handled.
Pumps weighing <25 kg may be lifted manually by the operator without the aid of lifting gear.
9. STORAGE
The equipment must always be stored in a covered place, not excessively humid, protected from
atmospheric agents and with temperatures between -10 °C and +40 °C, avoiding direct exposure
to sunlight. If the machine is to be stored for long periods, it is advisable not to remove it from its
packaging.
11
www.proindecsa.com / [email protected]