Olimpia splendid SECCOPROF 30 P Instrucciones Para El Uso Y El Mantenimiento página 41

With the appliance running
press the "TIMER" key to enter the function, then press key "TIMER" once or more times
to set the switch off delay time (from 1 to 24 hours), the led TIMER blinks in green.
When the value set on the display stops flashing, the value is saved and the led switches steady on.
When the set time finishes, the appliance switches off.
To deactivate the function, set the operation time to "00" or switch off the appliance.
Timer led
This led turns on in green when the function is active.
+ key
Press this key when the appliance is running to increase the desired percentage of humidity
in the room.
• Value settable from 30% to 90% (steps of 5 at a time). The starting value corresponds to the
one set previously.
• The percentage of humidity increases by 5% every time the key "+" is pressed. When the
maximum threshold (90%) is exceeded, the message "Co" appears on the display activating
the continuous dehumidification function.
Ex. .. -> 80 -> 85 -> 90 -> Co -> 30 -> 35 -> ...
It is not possible to change the percentage of humidity in "LAUNDRY" mode.
• Press the keys "+" and "-" simultaneously and the display will show room temperature.
- key
Press this key when the appliance is running to decrease the desired percentage of humidity
in the room.
• Value settable from 90% to 30% (steps of 5 at a time). The starting value corresponds to the
one set previously.
• The percentage of humidity decreases by 5% every time the key "-". is pressed. When the
minimum threshold (30%) is exceeded, the message "Co" appears on the display activating
the continuous dehumidification function.
Ex. .. -> 40 -> 35 -> 30 -> Co -> 90 -> 85 -> ...
It is not possible to change the percentage of humidity in "LAUNDRY" mode.
• Press the keys "+" and "-" simultaneously and the display will show room temperature.
Fan key
Press this key when the appliance is running to select the desired fan speed.
- Maximum speed - Led
- Minimum speed - Led
It is not possible to change the fan speed in "LAUNDRY" mode.
Mode key
Press this key when the appliance is running to select the desired function.
- "Laundry" mod - Led
- "Normal" mod - Led
- "Fan" mod - Led
turned on in green
turned on in green
on in green
on in green
on in green
EN - 13
SECCOPROF 30P - 40P