Program Playback - Teac PD-501HR Manual Del Usuario

Program playback (1)

1
You can create a playback program from up to 99 tracks
from the same disc .
o Insert a disc before programming.
1
When stopped, press the PROGRAM button.
Programming
Program number
o When using a WAV/DSD disc, track numbers are shown
with three digits.
o You cannot change the program during playback.
2
3
Track number
2
Use the number buttons to select a track.
Example: To program track number 15
Program number
Repeat step until you have programmed all the
2
desired tracks.
o If you try to program more than 99 tracks, "P-FULL"
appears on the display.
o If you program the wrong track by mistake, press
the CLEAR button to remove the last programmed
track.
o You cannot program a track number that does not
exist on the disc.
o Press the stop (8) button to clear the entire program.
Continued on the next page
Number of track
at the current
program number
23
EN