Idiomas disponibles
Idiomas disponibles
1. Verify that the power cord is
disconnected from the outlet.
2. Before vacuuming, fit the dust bag
flange onto the inlet port, taking care
not to damage the bag.
3. In order to prepare your vacuum for dry
vacuuming, make sure the edge of the
filter fits snugly along the edge of the
collection tank. Your vacuum comes with
the filter pre-installed. For installation
instructions, see page 11.
4. Place the powerhead back on the
collection tank and secure it in place
using the latches.
VACUUMING OPERATION
- 8 -
5. Insert the locking end of the hose into
the vacuum port on the collection tank
and turn clockwise to lock into place.
6. Choose the desired accessory and insert
onto the end of hose or extension wand.
7. The air flow regulation on the hose
handle allows you to adjust the amount
of vacuum suction. For best cleaning
results, fully close the air flow regulation.
NOTE: Open the air flow regulation for
lightweight rugs or thick carpets. Close the
air flow regulation suction for upholstery,
hard floor or low pile carpets.
﹢
8. Pull out the power cord slowly.
－
