Idiomas disponibles
Idiomas disponibles
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
Before assembling the vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received all the components of your new Kenmore Vacuum Cleaner.
WARNING
Electrical Shock Hazard.
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or injury.
To reduce the risk of electric shock, do
not expose to rain.
1. Undo the latches.
2. Lift the powerhead off the collection
tank and remove the pre-filter.
3. Remove the contents from inside the
collection tank; make sure you have all
contents as listed on page 5.
ASSEMBLY INSTRUCTIONS
Ⅱ
Ⅰ
4. Before vacuuming, fit the dust bag
flange onto the inlet port, taking care
not to damage the bag.
5. Your vacuum comes ready for dry
vacuum cleaning. If the pre-filter is not
installed, refer to page 11 for installation
instructions.
6. Place the powerhead onto the collection
tank and secure it with the latches.
- 6 -
Ⅰ
Ⅱ
