Nemox GELATO NXT1 i-Green Instrucciones Para El Uso página 21

Ocultar thumbs Ver también para GELATO NXT1 i-Green:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
THE PANEL AND THE FUNCTIONS OF NXT1 L'AUTOMATICA I-GREEN
Function
Operation
Function activation
1 TAP L.1
Pause
Pause function
1 TAP L.1
deactivation
Manual activation
TAP L.3
of the storage
1 x 3"
function
Selection of
TAP L.3
the storage cycle
Return to the
TAP L.3
production cycle from
1 x 3"
the storage phase
Turning off the machine TAP L.1
1 x 2"
ENGLISH
Description
Press the L.1. START button
It can be activated during the ice cream
formation or storage phases.
Always use when the cover is lifted for
any reason. The function is signalled
by a beep every 10 seconds.
ATTENTION: the Pause lasts up to 10
minutes, after which the machine turns
off automatically. 5 beeps indicate
the switch-off.
Press the START L.1 button to exit the pause
function and return to the production
or storage phase.
Press the L.3 button for 3 seconds.
Activation of the storage phase.
Selectable at any time during the ice cream
production phase or during the pause.
ATTENTION: storage lasts up to 8 hours.
After this time, the machine will
turn off automatically. 5 beeps
indicate the switch-off.
Press the L.3. button.
If you want to manually select the density
during the storage phase, repeatedly press
the L.3 button to select a different density
to the default setting.
The larger LEDs indicate a higher density.
Smaller LEDs indicate a lower density.
Press the L.3 button for 3 seconds.
Activation of the production cycle.
Selectable at any time during the ice cream
storage phase.
Press the L.1 button for 2 seconds.
Stop all the functions.
LED and sound
Switching from the production to the pause phase
- LED L.1 on
- TIME LINE LED L.2 flashing
- Pause start audible signal (1 beep)
- Audible signal every 10 seconds (1 beep)
Switching from the storage to the pause phase
- LED L.1 on
- LED flashing on the DENSITY CONTROL bar
- Pause start audible signal (1 beep)
- Audible signal every 10 seconds (1 beep)
Reaching the limit time:
- LED L.1 dim lighting.
- Machine switch-off audible signal (5 beeps)
Exiting the pause phase
- LED L.1 on
- LED goes from flashing to steady.
- Blade re-start audible signal (2 beeps)
Manual activation of the storage
- LED L.1 on
- LED L.2 TIME LINE all turned on
- LED L.3 storage button turned on
- LED L.4 DENSITY CONTROL turned on
- Storage start audible signal (3 beeps)
Reaching the limit time:
- Machine switch-off audible signal (5 beeps)
Selecting the storage density
- LED L.1 on
- LED L.4 DENSITY CONTROL lights up – corresponding
to the selection made.
- LED. TIME LINE L.2 all turned on
Returning to the production stage
- LED L.1 on
- TIME LINE LED L.2 light up gradually.
- LED L.3 Storage button turned off.
- DENSITY CONTROL LED L.4 turned off
- Blade movement audible signal (2 beeps)
Turning off the machine
- LED L.1 dim lighting.
- Machine switch-off audible signal (5 beeps)
21
Tabla de contenido
loading

Tabla de contenido