Nemox GELATO NXT1 i-Green Instrucciones Para El Uso página 20

THE PANEL AND THE FUNCTIONS OF NXT1 L'AUTOMATICA I-GREEN
The machine is designed to operate fully automatically. Below are the details of all the functions:
Function Operation
Machine start with TAP L.1
pre-cooling.
1 x 2"
Automatic mode.
Machine start without TAP L.1
pre-cooling.
1 x 2" +
Automatic mode.
1 TAP L.1
20
ENGLISH
Description
Press the START L.1 button for two seconds
to start the automatic cycle
(see the MAKING ICE CREAM WITH NXT1
L'AUTOMATICA paragraph).
At the beginning of the cycle, the machine
runs a pre-cooling cycle, during which the
blade does not mix the ingredients.
Once the pre-cooling cycle is completed,
the production phase starts automatically.
The TIME LINE bar gradually lights up.
The blade starts signalling with 2 beeps.
When the ice cream is ready, the machine
automatically switches to the storage phase.
ATTENTION: storage lasts up to 8 hours.
After this time, the machine will turn off
automatically. 5 beeps indicate the
switch-off.
Press and hold the START L.1 button for
two seconds.
Then press the START L.1 button again
The production phase starts immediately.
When the ice cream is ready,
the machine automatically switches
to the storage phase.
ATTENTION: storage lasts up to 8 hours.
After this time, the machine will turn
off automatically. 5 beeps indicate
the switch-off.
LED and sound
Pre-cooling cycle start:
- LED L.1 on
- Start-up acoustic signal (1 beep)
Starting the production phase:
- LED L.1 on
- LEDs L.2 on the TIME LINE bar light up gradually
- Blade start audible signal (2 beeps)
Starting the storage phase
- LED L.1 on
- LED L.2 TIME LINE all turned on
- LED L.3 storage button turned on
- LED L.4 DENSITY CONTROL turned on
- Storage start audible signal (3 beeps)
Reaching the limit time:
- Machine switch-off audible signal (5 beeps)
Starting the production phase and cycle
- LED L.1 on
- Start-up acoustic signal (1 beep)
- LEDs L.2 on the TIME LINE bar light up gradually
- Blade start audible signal (2 beeps)
Starting the storage phase
- LED L.1 on
- LED L.2 TIME LINE all turned on
- LED L.3 storage button turned on
- LED L.4 DENSITY CONTROL turned on
- Storage start audible signal (3 beeps)
Reaching the limit time
- Machine switch-off audible signal (5 beeps)