Mod "C": Automatic Drainage, Manual Drainage, And Self-Cleaning Cycle; Instructions For Cleaning And Maintenance; Routine Maintenance - Fagor evo CONCEPT Instrucciones De Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para evo CONCEPT:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

5.11.1 MOD "C": Automatic drainage, Manual drainage, and Self-cleaning cycle

MOD "C" models are fitted with a drainage pump as standard and there are three ways of draining the tub:
Automatic drainage: 5 minutes after switching off the machine, the wash tub is automatically drained,
unless a Manual Drainage or Self-cleaning cycle is run first.
Manual drainage: To drain the machine immediately without waiting 5 minutes, when the machine is
switched off go to the User Menu. (Chapter 5.1.1) and select YES in the DRAINAGE option.
Keep the hood closed.
Self-cleaning cycle: It is also possible to use the self-cleaning option, which in addition to draining the tub,
runs an internal cleaning cycle. Without removing the filters and with the hood closed, press SC
(Fig. 9), and SELF-CLEANING is displayed. Next, press START (Fig. 9) to begin the cycle. After
several minutes, the cycle ends, and a message is displayed together with a buzzer alarm and
the machine automatically switches off.
Switching off the machine
Hold down the ON/OFF button (Fig. 9) for 2 seconds.
5 minutes after switching off the machine, the wash tub is automatically drained, unless a Manual Drainage
or Self-cleaning cycle is run first.
If the machine is a SOFT model, it is possible that 15 minutes after switching it off, the appliance will run a
regeneration lasting 15 minutes, during which the message "REGENERATION" is displayed.

6 INSTRUCTIONS FOR CLEANING AND MAINTENANCE

It is essential to carry out all the necessary and relevant cleaning operations in order to increase the service
life of the machine and to ensure its correct operation. To ensure the efficient washing of the dishes, the
dishwasher must be perfectly clean and disinfected.
Contact a cleaning product distributor for detailed information about the
methods and products available for the regular disinfection of the machine.
Only use products suitable for use with industrial dishwashers.
The guarantee does not cover damage caused by the incorrect use of chemical
products.
When handling chemical substances, the product safety instructions and
recommended doses must be observed. Use protective clothing, gloves and
safety glasses when handling chemical products.
The appliance is made of high quality stainless steel. However, under certain conditions, corrosion may
appear.
To keep the stainless steel surfaces permanently free of corrosion, only use suitable cleaning products.

6.1 Routine maintenance

• Check daily that the wash/rinsing arms are correctly positioned and fastened and rotate correctly.
• Check that the filters and the relief valve are clean and correctly fitted.
• At the start of each working day, check and maintain the levels of detergent and rinse aid in the
containers to ensure they last throughout the working day. Check that the tubes and filter are
correctly fitted and submerged. Clean the detergent/rinse aid tube filters regularly to prevent
blockages. If the machine has a SOFT appliance, check the levels of salt.
• With a SOFT appliance, it is recommended to carry out a regeneration cycle every few days.
• Different types of detergent or rinse aid must not be mixed.
• The wash water in the tank should be changed every 40-50 washes or twice a day.
• The machine should be cleaned at the end of each working day.
• WARNING: Do not use jets of water, pressure or steam cleaners to clean the machine or its
environment.
DESAGUAR
NO / SI
The self-cleaning cycle does not replace the need for a more
exhaustive manual clean as necessary.
At the end of the day, the machine must be cleaned. Follow
the instructions given in this manual with respect to
cleaning.
DRAIN
VIDANGER
NO / YES
NON / OUI
ABLASSEN
SCARICO
NEIN /JA
NO / SI
77
Tabla de contenido
loading

Tabla de contenido