General Description - GYS GYSPACK TRUCK Manual De Instrucciones

Thank you for choosing GYSPACK TRUCK – this is a high quality product and in order to get the
maximum from it, we advise you to read this instruction manual carefully, and retain for future
reference.
G D
ENERAL ESCRIPTION
This autonomous starter is intended for starting vehicles equipped with 12V or 24V lead batteries
(liquid or gel electrolyte) from small cars to bigger trucks.
The GYSPACK TRUCK contains 2 high performance 22Ah 12V batteries. To function properly and to
ensure the durability of internal batteries, AFTER EACH USE the GYSPACK TRUCK must be
switched to the 12V position and connected to the mains to charge.
U
SING AS A STARTER
• • • • Disconnect the socket from the mains.
• • • • Turn the voltage selection switch to OFF.
• • • • Connect the red clamp to the (+) and the black clamp to the (-) of the
NB: In the event of polarity reversal, a warning buzzer will sound and the red
LED warning light will illuminate.
• • • • Turn the voltage selector switch to 12V or 24V depending on the battery of
• • • • Turn the key of your vehicle in order to activate the start function
NB : if the vehicle does not start, wait 3 minutes between attempts.
A vehicle which does not start after the third attempt may have a problem
unrelated to the battery: alternator, spark plug etc...
• • • • Once the vehicle has started, turn the voltage selection switch to OFF.
After starting, especially vehicles with large batteries, the red light will flash to
warn you that GYSPACK's internal batteries should be recharged.
• • • • Disconnect the black clamp, followed by the red clamp, from the vehicle.
To get the maximum from your machine and ensure the long life of
the internal battery, GYS recommended charging the unit after each
use.
battery.
the vehicle you wish to start.
7