Unpacking; Before Commissioning - Scheppach HC85V Traducción Del Manual De Instrucciones Original

*S3 25% = periodical intermediate duty with a duty cy-
cle of 25% (2.5 min based on a 10 minute period)
Noise and vibration
m Warning:Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
The noise levels have been determined in accordance
with EN ISO 3744:1995.
Sound power level LWA
Sound pressure level L
PA
Uncertainty K
wa/pA
Wear hearing protection.
- The total vibration emission values specified and the
device emissions values specified have been meas-
ured in accordance with a standardised test proce-
dure and can be used for comparison of one electric
tool with another.
- The total vibration emission values specified and the
device emissions values specified can also be used
for an initial estimation of the load.
A warning:
- The vibration values and noise emission values can
vary from the specified values during the actual use
of the electric tool, depending on the type and the
manner in which the electric tool is used, and in par-
ticular the type of workpiece being processed.
- It is necessary to determine the safety measures for
the protection of the operator based on an assess-
ment of the vibration load during the actual condi-
tions of use (In doing so, all parts of the operating
cycle must be taken into account such as times in
which the electric tool is switched off or times in
which it is switched on, but is not running under a
load).
7.

Unpacking

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
97 dB(A)
82 dB(A)
0,3 / 3 dB (A)
www.scheppach.com
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m WARNING!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!

8. Before commissioning

• Before connecting the machine, make certain that
the data on the type plate matches with the mains
power data.
• Check the device for transport damage. Immediate-
ly report any damage to the transport company that
delivered the compressor.
• The compressor must be installed close to the con-
sumer.
• Long air lines and supply cables (extension cable)
should be avoided.
• Ensure that the intake air is dry and dust-free.
• Do not install the compressor in a damp or wet room.
• Operate the compressor only in suitable areas (well
ventilated, ambient temperature +5°C to 40°C).
There must be no dust, acids, vapours, explosive or
flammable gases in the room.
• The compressor is suitable for use in dry rooms. It
must not be used in areas where splashed water is
present.
• The compressor may only be used outdoor briefly
when the ambient conditions are dry.
• The compressor must always be kept dry and must
not be left outdoors after work is complete.
GB | 23