Hansgrohe Pontos AquaCycle 900 Instrucciones De Servicio página 59

All the details and information in these instruc-
tions have been compiled taking into considera-
tion the valid standards and rules and regula-
tions, the state of the art as well as our knowl-
edge and experience of many years.
The manufacturer does not assume any
liability for damages resulting from:
Non-compliance with these instructions
•
Non-compliance with inspection and main-
•
tenance intervals
Any use that is not as intended
•
Deployment of untrained personnel
•
Unauthorised conversions
•
Technical modifications
•
Use of unauthorised spare parts
•
Operating a facility that is not in a techni-
•
cally perfect condition
In case of special designs, utilisation of addi-
tional ordering options or due to the latest tech-
nical changes, the actual scope of supply may
deviate from the explanations and illustrations
specified in these instructions.
The obligations agreed upon in the delivery
contract, the general terms and conditions as
well as the manufacturer's terms of delivery and
the effective statutory regulations at the time of
contract conclusion shall apply.
Warning!
Safety risk posed by
wrong spare parts.
Wrong or faulty spare parts
may impair safety and lead
to damage, malfunctions or
total breakdown. Therefore:
Only use the manufac-
turer's original spare
parts.
050608
Operating instructions AquaCycle 900
Procure spare parts via an appointed dealer or
directly from the manufacturer. The spare parts
list can be found in the facility documentation.
The guarantee provisions are included in the
manufacturer's general terms and conditions.
These instructions are protected by copyright
and may exclusively be used for internal pur-
poses.
Leaving the instructions to third parties, dupli-
cating the instructions in any form and manner
– even in excerpts – as well as utilisation and /
or communication of their contents is not per-
mitted without the manufacturer's written au-
thorisation, except for internal purposes.
Contraventions constitute an obligation to pay
compensation. All further rights reserved.
The facility was designed and manufactured by
Pontos GmbH.
EN3