Sleep Function; Refilling The Water Tank - Beurer maramed MK 500 Instrucciones De Uso

7.6 Sleep function

The maremed comes with a sleep function. Once the sleep function has been switched
®
on, the touch display will switch off.
1. To switch on the sleep function, press the SLEEP button
The SLEEP button
once the 5 seconds have elapsed.
Now it is only possible to press the SLEEP button
2. To switch off the sleep function, briefly press the SLEEP button
will start to light up again and all buttons can be pressed again.
Note
681.19_MK500_2019-05-28_01_Display_BEU
The UVC lamp will stay on when the sleep function is active. If you want the light to go out
completely, you can also switch the UVC lamp off.
1. To switch off the UVC lamp, press and hold the SLEEP button
UVC lamp has been switched off, it is no longer possible to guarantee that 99% of bacte-
rial contamination will be eliminated.
2. To switch the UVC lamp on again, press and hold the SLEEP button

7.7 Refilling the water tank

Refill the water tank as soon as this symbol
maremed ® .
Note
Approx. 1.5 litres of water will remain in the water tank.
To refill the water tank with water, proceed as follows:
1. Press the ON/OFF button
2. Pull the mains plug out of the socket.
3. Remove the mains plug from the maremed
4. Remove the top housing cover.
5. Remove the evaporator block with the water filter.
6. Empty out the water from the tank to the front.
7. Fill the tank fully up to the MAX marking (approx. 6 litres) with fresh, cold tap water.
8. Using the measuring jug, add 90 ml of the maremed
every 1 litre of tap water use 15 ml of maremed
9. Make sure that the upper part of the metal rods is dry before attaching the upper housing.
10. Put the evaporator block with water filter back into the tank and place the tank in the
desired location first.
11. Place the top cover onto the housing.
12. Insert the mains plug into the device and into the mains socket. Ensure that the cable
does not pose a trip hazard.
All manuals and user guides at all-guides.com
starts to flash for 5 seconds. The sleep function will be active
to switch off the maremed
and the ON/OFF button
681.19_MK500_2019-05-28_01_Display_BEU
681.19_MK500_2019-05-28_01_Display_BEU
681.19_MK500_2019-05-28_01_Display_BEU
681.19_MK500_2019-05-28_01_Display_BEU
lights up on the touch display of the
681.19_MK500_2019-05-28_01_Display_BEU
® .
.
®
special sea salt to the tap water (for
®
® special sea salt).
33
.
. The touch display
for 5 seconds. Once the
for 5 seconds.
.