Tabla de contenido
en
Error messages
Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Error messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem
Top indicator is flashing
quickly
Middle indicator is
flashing quickly
Middle and top indicat-
ors are flashing quickly
Bottom and top indicat-
ors are flashing quickly
The bottom and middle
indicators are flashing
quickly
86
Cause and remedy
"Comfort handle not recognised" error
Remove the Comfort handle and reconnect it (see
"Installation and connection – Connecting the
Comfort handle").
Remove the battery, wait for 10 seconds and rein-
sert it.
"Motor overheating" error
Empty and clean the dust container, pre-filter and
fine dust filter (see "Maintenance").
Remove the battery, wait for 10 seconds and rein-
sert it.
Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
"Jammed roller brush" error
Insert the grey Carpet Care roller brush instead of
the red roller brush fitted as standard (see "Using
the accessories supplied – Carpet Care roller
brush").
Select a lower power level (see "Use – Selecting
the suction power level").
Internal system error
Remove the battery, wait for 10 seconds, reinsert
it and charge it.
"Battery overheating" or "Battery not recognized" er-
ror
Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
Insert an original Miele AP01/AP02/AP03 lithium-
ion rechargeable battery (HX LA).
Tabla de contenido
