Installing With Rigid Latch/Uas: Solution B2-Fix+Lux Only - Cybex Silver SOLUTION B-FIX Manual Del Propietário

INSTALLING WITH RIGID LATCH/UAS: SOLUTION
B2-FIX+LUX ONLY
1. Select a seat location allowed by your vehicle
manufacturer that is equipped with a LAP AND
SHOULDER BELT system. Locate the vehicle
lower LATCH/UAS anchors or the symbols
indicating their location (see pg. 17).
2. Place the booster on its side. While squeezing
the orange Rigid LATCH/UAS Adjustment
Handle located on the bottom of the Solution
B2-Fix+Lux Booster Base q, pull the Rigid
LATCH/UAS Connectors out until they stop.
Then rotate the Connectors 180° w.
3. Push the Rigid LATCH/UAS Connectors onto
the vehicle lower anchors
CLICK. The GREEN
on the release button when the Rigid LATCH/
UAS Connectors are securely attached to the
lower anchors r.
4. While squeezing the Rigid LATCH/UAS
Adjustment Handle, push the booster until it
rests flat against the vehicle seat back t.
5. Release the handle and the booster seat will
lock into place.
6. Make sure that the booster seat is connected
safely by trying to pull it out on both sides y.
19
until you hear them
e
security bar will be visible
q
e
t
w
r
y