Installing With Latch/Uas: Solution B-Fix Only - Cybex Silver SOLUTION B-FIX Manual Del Propietário

INSTALLING WITH LATCH/UAS: SOLUTION B-FIX ONLY

1. Select a seat location allowed by your vehicle
manufacturer that is equipped with a LAP AND
SHOULDER BELT system. Locate the vehicle
lower LATCH/UAS anchors or the symbols
indicating their location (see pg. 17).
2. Remove the LATCH/UAS connectors from
their storage location under the Solution B-Fix
Booster Base and attach to the vehicle lower
q
LATCH/UAS anchor bars until they lock onto the
bars on both sides of the seat.
3. Using your full weight, push the booster seat
firmly into the vehicle seat while pulling the
Lower Anchor Strap on either side of the booster
seat to remove slack w. Do not overtighten.
Note: Make sure both lower anchor connectors
are facing downward as shown and the straps
are not twisted e.
4. Make sure that the booster seat is connected
safely by trying to pull it out on both sides r.
q
e
w
r
18