Care And Maintenance - 3TECH TURBINE Ti-940L Manual De Usuario

distorted shaft will reduce the bearings and rotor service life.
– Never use the worn and distorted blade of the carbide bur or diamond bur; otherwise they could cause premature deterioration of the rotor and
premature wear of the bearings.
– Keep the carbide bur or diamond bur clean. A dirty or unclean shaft being inserted into the chucking system will cause unfi rmed clamping.
– Insert the carbide bur or diamond bur to the bottom of the chucking system and pull on it to check that it is securely held and that the chucking
system is okay.
– It is not permitted to use a short shaft of the carbide bur or diamond bur in the medical device with standard or torque head.
– Wear gloves or fi ngerstall to prevent an injury or infection.
When removing the carbide bur or diamond bur
– Do not touch rotating carbide bur or diamond bur.
– Never press push button while the carbide bur or diamond bur is rotating.
– Wear gloves or fi ngerstall to prevent an injury or infection.

9. Care and maintenance

9.1 Manual external cleaning and disinfection
– Brush o under fl owing tap water with medium hard toothbrush
– Let the head upward and wash the body under fl owing tap water to remove residual cement and composite or blood.
– Wipe down the medical device with a lint-free cloth immersed in cleanser
– Spray the disinfectant on a link-free cloth, and thoroughly wipe down the medical device.
35