– Tighten the screw cap of the turbine hose hang-tightly (Fig.6-11 ).
– Assemble the medical device accurately on the LED coupling until the coupling audibly locks in the medical device (Fig.6-11 ).
6.5.2 Removing the medical device
– Hold the LED coupling tightly, slide the lock ring (Fig.6-12 ).
– Pull the medical device o (Fig. 6-12 ).
Fig. 6-11
Fig. 6-12
NOTE
Rotate the spray ring on the LED coupling in order to regulate the fraction of water when the LED coupling NSK® is mounted. Recommended water
amount should be more than 50 ml/min.
32