Connection To The Power Supply - Dometic ENERGY & LIGHTING TEC Serie Instrucciones De Montaje Y De Uso

CONNECTION TO THE POWER SUPPLY

Important
The connection must be carried out by
GB
a qualifi ed, authorised technician, in
compliance with current laws and using
appropriate, prescribed materials.
Warning - Caution
Before carrying out any operation, turn
the main power supply off.
Proceed as indicated.
1 -Open the door (E).
2 -Unfasten the screws to
dismantle the casing (F).
3 -Use cables of the correct
diameter (see "Table of
Cable Sections").
4 -Connect the cable to
terminals
live and earth) on the
panelboard.
5 -Connect
powering
panel to the socket (L).
6 -Connect the battery as
indicated in the following
paragraphs.
7 -Replace the casing (F)
and fasten the screws.
8 -Close the door (E) when
the operation has been
completed.
All manuals and user guides at all-guides.com
(G) (230V
cable (H)
the control
intake (L)
cable (H)
Important
Only connect the battery after having
made all the electrical connections.
230V (POWER 12V
CABLES) (BATTERY
CHARGER)
4 mm 2.5 mm
2 2
casing (F)
door (E)
terminals (G)
- battery
terminals
- -
20
Table of Cable Sections
LENGTH UP TO 6 LENGTH OVER 6 M
M (BATTERY (BATTERY
CONNECTION) CONNECTION)
16 mm 25 mm
2 2
fuel reserve indicator
battery charger
+ battery
(G)
User Manual