Safety Devices; Safety Labels; Areas With Residual Risks; Residual Risks - Sanremo YOU Manual De Instrucciones

YOU
2

SAFETY DEVICES

2.1 SAFETY LABELS

Warning labels with descriptive pictograms are
present in all areas that are dangerous for the
operator or technician.
Labels showing safety instructions
are applied to the machine;
they must be followed carefully
by anyone operating on the
machine. Failure to comply with
the instructions on the label waives
any liability of the manufacturer
for damage to property or injury to
persons that may arise.
Danger: voltage on
Nameplate located on all live areas. Do
not work while the voltage is on.
Danger of burning
Label placed on the top part of the cup
heating plate.

2.2 AREAS WITH RESIDUAL RISKS

Areas with residual risks are areas that cannot be
protected due to the specific type of operation they
are used for; on the coffee machine, these areas are
as follows:
- the area (1) of the group when dispensing coffee;
- the steam tap area (2) when heating drinks;
- the hot water dispensing area (3).
Risk of burning is present in these
areas.
SAFETY DEVICES

2.3 RESIDUAL RISKS

Residual risks are addressed through appropriate
personnel training and the use of personal protective
equipment (PPE). Residual risks arise from the
following hazards: cutting or shearing, crawling or
abrasion, impact, high-pressure fluid injection or
ejection, slipping, tripping, falling, electrocution,
burns, scalding, and ergonomic hazards

2.4 DANGEROUS AREAS

60
Safety devices
risk of coming into contact
with hot surfaces
risk of face contact with
steam and/or hot water
jets
risk of slipping on damp
and/or wet surfaces
Dangerous areas are all areas
inside the machine, under the
safety guards, where the technician
can operate when repairing the
machine. These areas are accessible
only by the technician.
1
2
3