Function Indicator; Warning Indicator - cecotec BOLERO AGUAZERO 6800 STAINLESS STEEL Manual De Instrucciones

ENGLISH
Alt indicator
Upper spray arm Lower spray arm
- Upper spray arm: if you activate this option, the dishwasher will only wash the tableware
on the upper basket.
- Lower spray arm: if you activate this option, the dishwasher will only wash the tableware
on the lower basket.
- If you activate both, the dishwasher will clean both baskets.

Function indicator

Extra Drying TurboSpeed
- Extra Drying: activate this function to add an extra drying. You can only use this setting
with the Auto, Intensive, Universal, ECO, Glass and 90 min programmes.
- TurboSpeed: use this function to reduce the time of the programme you have selected.

Warning indicator

Rinse Aid Salt
- Rinse Aid: if this indicator is lit up, it means the dishwasher has little rinse aid.
- Salt: if this indicator is lit up, it means the dishwasher has little salt.
Washing phase indicator
- The prewash, wash, rinse and dry cycles are indicated with 2 indicator lights on.
- The main wash cycle is indicated with 4 indicator lights on.
- The rinse cycle is indicated with 6 indicator lights on.
- The dry cycle is indicated with 8 indicator lights on.
- The lights will turn off when the washing ends.
Display
It shows the remaining time, the delay start, error code, etc.
Starting a washing cycle
Fig. 28
82
- Remove all coarse residues from the tableware, avoid using the pre-rinse of the
dishwasher.
- Take out the upper and lower baskets, load the tableware and push them back inside. It is
recommended to load the lower basket first and then the upper basket.
- Fill the detergent compartment.
- Press the power button, choose a programme and the indicator light will light up. Next,
close the dishwasher door to start the cycle.
Changing the programme
Fig. 29
- A programme can only be changed if it has been running for a short time, otherwise the
detergent may have already been released or the wash water with detergent may have
already been drained. In this case, the dishwasher needs to be re-set and the detergent
compartment must be refilled.
- If you want to change the programme when the dishwasher is operating:
- Slightly open the dishwasher door so it stops. When the spray arms have stopped, you
can open it completely.
- Hold down the programme button for 3 seconds. The machine will enter the programme
selection mode.
- You can change the programme you prefer. Close the dishwasher door again to start the
cycle.
Introducing tableware during the cycle
Fig. 30
- You can add tableware at any time before the detergent compartment is activated.
- Slightly open the dishwasher door so it stops. When the spray arms have stopped, you
can open it completely.
- Add the table water you have forgotten.
- Close the door and the dishwasher will resume the washing.
WARNING: it is dangerous to open the door in the middle of the cycle, as the hot steam
can burn you.
Automatic door opening
After washing, the door will open automatically for better drying results.
NOTE: the dishwasher door must not be blocked by any object, as this could alter the
door locking functionality.
NOTE: the Rapid and Soak programmes do not feature the automatic door opening
function.
ENGLISH
83
AGUAZERO 6800 STAINLESS STEEL