Mitsubishi Electric PZ-61DR-E Manual De Instalación página 13

11. Service menu (Maintenance password is required.)
At the Main display, press the MENU button and select "Service" to make the maintenance settings.
When the Service menu is selected, a window will appear asking for the password.
To enter the current maintenance password (4 numerical digits), move the cursor to the digit you want to change with the F1 or F2 button,
and set each number (0 through 9) with the F3 or F4 button. Then, press the SELECT button.
Note: The initial maintenance password is "9999". Change the default password as necessary to
prevent unauthorized access. Have the password available for those who need it.
Note: If you forget your maintenance password, you can initialize the password to the default
password "9999" by pressing and holding the F1 and F2 buttons simultaneously for three
seconds on the maintenance password setting screen.
If the password matches, the Service menu will appear.
S e v r c i e m e n u
Test run
Input maintenance info.
Lossnay
Check
Self check
M a n i m e n : u
C u s r r o
(1) Test run
Lossnay does not support this function. Press the RETURN button to go back to the Service menu screen.
For the Lossnay test run procedure, refer to the Installation Manual for Lossnay.
(2) Input maintenance Info.
Select "Input maintenance Info." from the Service menu to bring up the Maintenance information
screen. Refer to the Lossnay unit Installation Manual for how to make the settings.
Note: The following settings can be made from the Maintenance Information screen.
· Registering model names and serial numbers
Enter the model names and serial numbers of Lossnay unit. The information
entered will appear on the Error information screen. Model names can have up to 18
characters, and the serial numbers can have up to 8 characters.
· Registering dealer information
Enter phone number of a dealer. The entered information will appear on the Error information
screen. Phone number can have up to 13 characters.
· Initializing maintenance information
Select the desired item to initialize the above settings.
(3) Lossnay setting
Lossnay does not support this function. Press the RETURN button to go back to the Service menu screen.
All manuals and user guides at all-guides.com
1/2 S e v r c i e m e n u 2/2
Maintenance password
Remote controller check
Function setting
Initializing
M a n i m e n : u
C u s r r o
- 13 -
Service menu
Enter maintenance password
Select:
Cursor
Maintenance information
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor