Acqua Brevetti BravoMATIC FT030 Instrucciones De Instalacion Y Uso página 32

A1.10 Upper panel
On the BravoMATIC display, it is possible to see the filter service settings and the presence of any
malfunctions or faults.
ALARM
Pressing the buttons
time.
A 1.11 Filter backwash setting
The control unit allows the setting of cleaning in two ways:
1. Day/Time interval (TIME / DATE programming)
Day: minimum 1, maximum 4 – Scheduled time: day time to set.
2. Time interval: (FIXED INTERVAL programming)
Time: minimum 1 h / maximum 96 h.
Washing starts automatically when the set time has elapsed. During the cleaning the program carries
out 1 washing cycle which involves 3 rotations of the filter cartridge (opening - closing the drain). You
can set up to a maximum of 10 cycles per wash for a total of 30 rotations.
BravoMATIC is set up by company for cleaning every 4 days at 00:00 and for 1 wash cycle with 3
rotations. During the filter washing, a LED lights up inside which allows you to see, through the slits
in the front casing, the cleanliness of the cartridge.
A 1.12 Manual backwash of the filter
To carry out a filter backwash, press the buttons
BravoMATIC - ENGLISH
Symbol
When the display is off in stand-by:
Filter properly powered
-
Filter in filtration position
-
Filter in backwashing stage and LED lighting on
-
When the display shows "ALARM":
Filter out of order, see paragraph A3
-
simultaneously, it is possible to launch a backwash cycle at any
MAN139 PAGE E-7
Filter action
Next menu\increase
Previous menu\decrease
Menu\editing\confirming
simultaneously.