Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ZSX Ec
4.3 Changing the saw chain
Use the following procedure to change the saw
chain:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Open the spring-loaded lower protective flap
(11) downward.
4.
Using the combination screwdriver (B), turn
the fillister head screw (10) counterclockwise
to loosen it.
5.
Open the cover and remove it.
02/2022
Caution
Risk of injury from a stopped saw chain
The saw chain is sharp. You can hurt yourself when you change the saw chain.
Be careful when you change the saw chain.
➢
➢
Wear protective gloves when you change the saw chain.
Fig. 3: Opening the protective flap
Fig. 4: Removing the cover
13
Tabla de contenido
