Pendulum Stroke Adjustment; Tear-Free Sawing; Positioning The Base Plate - Mafell P1cc Manual De Instrucciones

P1cc

5.3 Pendulum stroke adjustment

The intensity of the pendulum movement can be
selected in four levels at the control lever (3). The
pendulum stroke presses the saw blade against the
workpiece during the working stroke. During the
downward stroke, the saw blade is lifted off the
workpiece. This reduces frictional heat and ensures
optimal chip removal.
The pendulum stroke is switched off at setting 0.
You work without pendulum stroke at:
•
Thin material
•
Working with rasp, butt tooth blade or blade
•
Soft material
•
Saw-cutting without pilot drilling for cut-outs in wood
•
Backward sawing

5.4 Tear-free sawing

The chip breaker guard allows you to work without
tearing.
To do this, push the chip breaker guard (C) all the
way up to the saw blade.
Use a sharp saw blade for tear-free work!

5.5 Positioning the base plate

After it has been released, the base plate can be moved forward and backward. The moving process is
described in chapter 4.5 Base plate.
Adjusting the base plate allows the following possible positions:
•
Standard position for rectangular cuts (saw blade is completely enclosed).
•
Position of the base plate flush with the front edge of the saw blade (for sawing close to the edge).
11/2021
Fig. 12: Pendulum stroke adjustment
Fig. 13: Mounting the chip breaker guard
17