Manual Mode - PYD Electrobombas LKS Serie Manual De Instalación Y Mantenimiento

OPERATING AND MAINTENANCE MANUAL
LKS SERIES SUBMERSIBLE ELECTRIC PUMP
1.
Slide the key of the switch (5) in the direction of the automatic side.
ENG
2.
Place the pump on a firm surface or use a rope tied through the hole in the carrying handle (6) to
submerge the pump in a well or pit.
3.
Plug the power cord (4) into a power outlet.

Manual Mode

The pump can remain constantly running when in manual mode.
1.
Slide the switch key (5) in the direction of the manual side.
2.
Place the pump on a firm surface or use a rope tied through the hole in the carrying handle (6) to
submerge the pump in a well or pit.
3.
Plug the power cord (4) into a power outlet.
Choice of outlet:
•
The LKS pump has two output options. You can choose one of the outlets for irrigation and block the
other with a plastic plug.
•
A plastic plug is installed at the top of the outlet as the default setting.
•
The performance of the lower outlet is better than the upper outlet, expressing 2000 l / h more flow
rate and 1 m more head.
•
It is recommended to use the lower outlet only for pumping dirty water. In case the max. particle dia-
meter is less than 5 mm, the upper outlet can also be used.
www.proindecsa.com / [email protected]
10