Technical Description; Foreseen Use; Possible Misuse; Technical Characteristics - PEDROLLO MAGNIFICA Serie Instrucciones Originales De Uso

TECHNICAL DESCRIPTION

Self-priming electric pump for swimming pools with built-in pre-filter and water-insulated motor.
The pump is made up of the following materials:
Component
Pump body
Impeller
Diffuser
Seal holder insert
Shaft
Seal
Cover
Prefilter
Base

FORESEEN USE

• Clean or slightly dirty water with suspended solids, with a maximum temperature of 40°C.
• Suitable for installation in ventilated and weather-protected areas with a maximum environment temperature of 50°C.
The use of the device for improper purposes or in ways not provided for in this manual is strictly forbid-
den. Improper use deteriorates the safety and efficiency features of the pump; the Manufacturer may
not be held responsible for failures or accidents due to non-compliance with the recommendations
given in this manual.

POSSIBLE MISUSE

• Installation of the pump or system with pipes subject to tension or other types of mechanical stress.
• Pump operations outside the working range or with excessive pressure.
• Installation or repairs carried out on the pump and system by unqualified personnel.

TECHNICAL CHARACTERISTICS

TECHNICAL DATA

Supply voltage and frequency
Sound pressure
Max. starts/hour
Maximum allowed pressure in the pump casing
Maximum amount of chlorides
pH of use
Protection
22 | ENGLISH
Material
PP+30%GF
Noryl+20%GF
Noryl+20%GF
PP+30%GF
Stainless steel AISI 431
AISI316-Graphite- Aluminium oxide
PC
PP+40%M
PP+40%M
Single-phase up to 240 V – 50/60Hz
Three-phase up to 480 V – 50/60 Hz
≤70 dBA (Magnifica 5); ≤65 dBA (Magnifica 1-2-3-4)
30 at regular intervals
2.5 bar
0.5%
6.8 – 8.4
IP 55