Technical Data; Application Limits; Characteristic Curves - PEDROLLO DG ped Instrucciones De Uso

TECHNICAL DATA

Supply voltage ~ 230 V ± 10%
Frequency 50/60 Hz
Insulation: class F
Max absorbed current
– 7.5 A DG PED 3
– 10 A DG PED 5
P1 Maximum absorbed power:
– 1.0 kW DG PED 3
– 1.5 kW DG PED 5
Insulation: class IP X4
Factory set point 3 bar
Fuse 12.5 A (rapid intervention)

CHARACTERISTIC CURVES

60
max 5.5 bar
50
40
Set point 3 bar
30
20
10
0
0 10 20 30
MODEL POWER
P2
Single-phase kW HP
DG PED 3 0.75 1
DG PED 5 1.1 1.5
Q = Flow rate H = Total manometric head
Three phase motor efficiency class (IEC 60034-30-1)
The performances shown refer to a head in aspiration equal to -1 m(aspiration of 1 m.). If the water level in aspira-
tion is less than the depth of entrance of the pump the performances will be reduced accordingly.
DG PED 3
min 1 bar
40 50 60 70 80
Q (l/min)
MAX PERFORMANCES
Q
l/min metres
5 – 80 55 – 10
IE3
5 – 120 55 – 10
Tolerance of characteristic curves in compliance with EN ISO 9906 Grado 3B.

APPLICATION LIMITS

• Manometric suction lift up to 8 m
• Liquid temperature between 0 °C and +40 °C
• Ambient temperaturebetween 0 °C and +40 °C
• Max. working pressure 10 bar
• Continuous service S1
• Vertical position running
CLEAN WATER
DOMESTIC USE
CIVIL USE
60
max 5.5 bar
50
40
Set point 3 bar
30
20
10
0
90
0 10 20 30 40 50 60 70 80 90 100 110
PERFORMANCES (ADJUSTABLE SET POINT)
H Min. Set Point
bar l/min
1 35 – 80
1 50 – 120
DG PED 5
min 1 bar
Q (l/min)
Set Point
Max. Set Point
Taratura Std
bar l/min bar
3 5 – 58 5.5
3 5 – 92 5.5
ENGLISH |
120 130
l/min
5 – 30
5 – 50
21