Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Use
EN
7. Use the Mopping Function
It is recommended that all floors are vacuumed at least three times before
the first mopping session to achieve a better cleaning effect.
1) Dampen the mop pad and wring out excess water. Insert the mop pad into
the slot of the water tank as shown in the figure, and paste the pad firmly.
①
②
2) Open the water tank lid, fill the tank with water, then securely close the lid.
Note: Do not use detergent or disinfectant.
14
3) Align the mopping module as indicated by the arrow, then slide it into the
back of the robot until it clicks into place. Press the button
to start cleaning.
Click
Click
Note:
• It is not recommended to use the mopping function on carpets.
③
• Use the app to adjust the water flow as required.
4) Press the two side clips inwards and slide the water tank backwards to
separate it from the robot.
Note: When the robot is charging or not in use, remove the mopping module,
pour out all the remaining water in the tank, and clean the mop pad to prevent
mildew or odors.
Routine Maintenance
Clean the Dust Bin
* Clean after each use
or use the app
1. Open the robot cover, then press the dust
bin clip to remove the dust bin.
Clean the Filter
1. Remove the filter and tap its basket gently.
Note:
· Do not attempt to clean the filter with brushes or fingers.
· Rinse the dust bin with clean water only. Do not use any detergent.
· Only use the dust bin and filter when they are completely dry.
· The filter is recommended to be cleaned every two weeks and replaced every three months.
2. Open the bin cover and empty the
3. Clean the dust intake.
bin as shown in the diagram.
2. Do not wash the filter. Only the dust bin is washable. Thoroughly dry it before re-installing.
EN
15
Tabla de contenido
