Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FAQ
EN
Problem Type
Solution
Robot returns to the base without
DND mode prevents the robot from performing auto-empty tasks.
performing auto-empty tasks
Check whether the dust collection bag is full. If so, replace it with a new one. It is recommended to replace
The dust collection bag is full
the bag every 4-6 weeks. If not, check whether the dust intake or air duct at the bottom of the base is
blocked. Remove any blockage before use.
The auto-empty duration can be
When the robot has been performing auto-empty tasks for a period of time, or when the air duct does not
unacceptably long sometimes
function smoothly, the auto-empty duration will be extended to prevent blockage.
The upper cover of base fails to be closed
Check whether a dust collection bag is installed. If not, install one.
24
Specifications
Robot
Model
RLS3D
Battery
5200 mAh (Nominal Capacity)
Charging Time
Approx. 6 hours
Wireless Connectivity
Wi-Fi IEEE 802.11b/g/n 2.4 GHz
OS Compatibility
Android 4.4 & iOS 10.0 or above
Rated Voltage
14.4 V
Rated Power
46 W
Operation Frequency
2400-2483.5 MHz
Maximum Output Power
＜ 20 dBm
Auto-Empty Base
Model
RCS7
Rated Input
120 V ~ 50-60 Hz 4 A
Rated Output
19.8 V
1 A
Under normal use of condition, this equipment should be kept a separation
distance of at least 20cm between the antenna and the body of the user.
EN
25
Tabla de contenido
