Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connect with Mi Home/Xiaomi Home App
EN
The appliance works with the Mi Home/Xiaomi Home app, which can be
used to control the appliance and make it interact with other smart devices.
Scan the QR code on the robot or search "Mi Home" or "Xiaomi Home" in the app
store to download and install the app.
Under the Cover
2. Add Device
Open the Mi Home/Xiaomi Home app, tap "
" in the upper right, and scan
the QR code above again to add "Dreame Bot D10 Plus". Please follow the
prompts to finish the Wi-Fi connection.
xxxxxx' s home
Add a device
No home environment info
Scan
Devices
Rooms
Note:
• Only 2.4GHz Wi-Fi is supported.
• The version of the app might have been updated, please follow the instructions
based on the latest app version.
12
3. Reset Wi-Fi
Simultaneously press and hold the buttons
and
until you hear a voice
prompt saying, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
How to Use
1. Turn On/Off
Press and hold the button
for 3 seconds to turn on the robot. Once the
power indicator turns solid white, the robot is on standby. To turn off the
robot, press and hold the button
for 3 seconds when the robot is not
moving.
2. Start Cleaning
Press the button
briefly to turn on the robot. Upon activation, the robot
will accurately map out a route, methodically clean along the edges and
walls, then finish by cleaning each room in an S-shaped pattern to ensure
a thorough job.
3. Cleaning Mode
Dreame Bot D10 Plus has four cleaning modes: Quiet, Standard, Strong,
and Turbo. The default mode is Standard. You can specify the cleaning
mode in the app.
4. Pause/Sleep Mode
Pause: Press any button briefly to pause the robot during cleaning.
Sleep Mode: If the robot pauses for more than 10 minutes, it automatically
enters the sleep mode, and the power indicator and charging indicator will
go off. To wake up the robot, press any button.
Note:
· The robot will turn off automatically if left in Sleep Mode for more than 12 hours.
· If the robot is paused and placed onto the base, the current cleaning task will
end.
5. Spot Clean Mode
When the robot is paused or in Standby Mode, press and hold the button
3 seconds to start Spot Clean Mode. In this mode, it will clean a square-shaped
area of 1.5×1.5 meters directly around the robot. When the spot cleaning is
done, the robot will automatically return to its original location and power off.
Note: Activating Spot Clean Mode will end the current cleaning task of the robot.
6. Additional App Functions
Follow the instructions on the app interface to use more functions. The version
of the app might have been updated; please follow the instructions based on
the current app version.
EN
for
13
Tabla de contenido
