Troubleshooting - Kenmore KW3050 Manual De Uso Y Cuidado

Review this table to find do-it-yourself solutions for minor performance problems. Any
service needed, other than maintenance described in this Use & Care Guide, should be
performed by a qualified service agent.
WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
PROBLEM
No power supply.
The wet/dry
Faulty power cord.
vacuum will not
operate.
Collection tank is full.
Switch in the wrong position.
The cartridge filter is missing or
damaged.
Incorrect use of foam filter when
dry vacuuming.
The dust comes
out from the
The exhaust filter is missing or
motor cover.
damaged.
Vacuum has been used to collect
fine dust, such as dry wall dust,
fireplace soot, or ash, without a
fine dust filter.
There are blockages in the nozzle,
or hose, or the collection tank
inlet.
Reduced
efficiency and The cartridge filter is clogged by
motor/speed dry dust.
vibration.
Float valve has closed.

TROUBLESHOOTING

POSSIBLE CAUSE
Check the power supply, cord, breakers, and
fuses.
Unplug and check the power cord. If
damaged, have it repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the power head.
Attach or replace the cartridge filter.
Replace the foam wet filter with the
cartridge filter.
Attach or replace the exhaust filter.
Remove the standard cartridge filter and buy
the appropriate fine dust filter.
Unplug and check nozzle, hose, and collection
tank inlets for blockages.
Take off the filter and clean it or install a new
cartridge filter.
Empty the collection tank of any liquid waste
and ensure the float valve located underneath
the filter is able to move freely.
- 21 -
SOLUTION